This tutorial makes a couple of assumptions. The first assumption is that you have a basic knowledge of Salt. To get up to speed, check out the Salt Walkthrough.
The second assumption is that your Salt development environment is already configured and that you have a basic understanding of contributing to the Salt codebase. If you're unfamiliar with either of these topics, please refer to the Installing Salt for Development and the Contributing pages, respectively.
Salt comes with a powerful integration and unit test suite. The test suite allows for the fully automated run of integration and/or unit tests from a single interface.
Salt's test suite is located under the
tests directory in the root of Salt's
code base and is divided into two main types of tests:
unit tests and integration tests. The
integration sub-test-suites are located in the
tests directory, which is
where the majority of Salt's test cases are housed.
There are a couple of requirements, in addition to Salt's requirements, that need
to be installed in order to run Salt's test suite. You can install these additional
requirements using the files located in the
depending on your relevant version of Python:
pip install -r requirements/dev_python27.txt pip install -r requirements/dev_python34.txt
To be able to run integration tests which utilizes ZeroMQ transport, you also need to install additional requirements for it. Make sure you have installed the C/C++ compiler and development libraries and header files needed for your Python version.
This is an example for RedHat-based operating systems:
yum install gcc gcc-c++ python-devel pip install -r requirements/zeromq.txt
On Debian, Ubuntu or their derivatives run the following commands:
apt-get install build-essential python-dev pip install -r requirements/zeromq.txt
This will install the latest
pyzmq (with bundled
libzmq) Python modules required for running integration tests suite.
As noted in the introduction to this tutorial, Salt's test suite is located in the
tests directory in the root of Salt's code base. From there, the tests are divided
into two groups
unit. Within each of these directories, the
directory structure roughly mirrors the directory structure of Salt's own codebase.
For example, the files inside
tests/integration/modules contains tests for the
files located within
tests/unit are the only directories discussed in
this tutorial. With the exception of the
tests/runtests.py file, which is
used below in the Running the Test Suite section, the other directories and
files located in
tests are outside the scope of this tutorial.
Given that Salt's test suite contains two powerful, though very different, testing approaches, when should you write integration tests and when should you write unit tests?
Integration tests use Salt masters, minions, and a syndic to test salt functionality directly and focus on testing the interaction of these components. Salt's integration test runner includes functionality to run Salt execution modules, runners, states, shell commands, salt-ssh commands, salt-api commands, and more. This provides a tremendous ability to use Salt to test itself and makes writing such tests a breeze. Integration tests are the preferred method of testing Salt functionality when possible.
Unit tests do not spin up any Salt daemons, but instead find their value in testing
singular implementations of individual functions. Instead of testing against specific
interactions, unit tests should be used to test a function's logic. Unit tests should
be used to test a function's exit point(s) such as any
Unit tests are also useful in cases where writing an integration test might not be possible. While the integration test suite is extremely powerful, unfortunately at this time, it does not cover all functional areas of Salt's ecosystem. For example, at the time of this writing, there is not a way to write integration tests for Proxy Minions. Since the test runner will need to be adjusted to account for Proxy Minion processes, unit tests can still provide some testing support in the interim by testing the logic contained inside Proxy Minion functions.
Once all of the requirements are installed, the
runtests.py file in the
salt/tests directory is used to instantiate
Salt's test suite:
python tests/runtests.py [OPTIONS]
The command above, if executed without any options, will run the entire suite of integration and unit tests. Some tests require certain flags to run, such as destructive tests. If these flags are not included, then the test suite will only perform the tests that don't require special attention.
At the end of the test run, you will see a summary output of the tests that passed, failed, or were skipped.
The test runner also includes a
--help option that lists all of the various
command line options:
python tests/runtests.py --help
You can also call the test runner as an executable:
Salt's set of integration tests use Salt to test itself. The integration portion of the test suite includes some built-in Salt daemons that will spin up in preparation of the test run. This list of Salt daemon processes includes:
2 Salt Masters
2 Salt Minions
1 Salt Syndic
These various daemons are used to execute Salt commands and functionality within the test suite, allowing you to write tests to assert against expected or unexpected behaviors.
A simple example of a test utilizing a typical master/minion execution module command
is the test for the
test_ping function in the
def test_ping(self): ''' test.ping ''' self.assertTrue(self.run_function('test.ping'))
The test above is a very simple example where the
test.ping function is
executed by Salt's test suite runner and is asserting that the minion returned
If you look in the output of the
--help command of the test runner, you will
see a section called
Tests Selection Options. The options under this section
contain various subsections of the integration test suite such as
--states. By selecting any one of these options, the test daemons
will spin up and the integration tests in the named subsection will run.
The testing subsections listed in the
Tests Selection Options of the
--help output only apply to the integration tests. They do not run unit
./tests/runtests.py executes the entire test suite (barring any tests
requiring special flags), the
--unit flag can be used to run only Salt's
unit tests. Salt's unit tests include the tests located in the
The unit tests do not spin up any Salt testing daemons as the integration tests do and execute very quickly compared to the integration tests.
There are times when a specific test file, test class, or even a single,
individual test need to be executed, such as when writing new tests. In these
--name option should be used.
For running a single test file, such as the pillar module test file in the
integration test directory, you must provide the file path using
/ as separators and no file extension:
./tests/runtests.py --name=integration.modules.test_pillar ./tests/runtests.py -n integration.modules.test_pillar
Some test files contain only one test class while other test files contain multiple test classes. To run a specific test class within the file, append the name of the test class to the end of the file path:
./tests/runtests.py --name=integration.modules.test_pillar.PillarModuleTest ./tests/runtests.py -n integration.modules.test_pillar.PillarModuleTest
To run a single test within a file, append both the name of the test class the individual test belongs to, as well as the name of the test itself:
./tests/runtests.py \ --name=integration.modules.test_pillar.PillarModuleTest.test_data ./tests/runtests.py \ -n integration.modules.test_pillar.PillarModuleTest.test_data
-n options can be used for unit tests as well as integration
tests. The following command is an example of how to execute a single test found in
./tests/runtests.py \ -n unit.modules.test_cp.CpTestCase.test_get_template_success
Once you're comfortable running tests, you can now start writing them! Be sure to review the Integration vs. Unit section of this tutorial to determine what type of test makes the most sense for the code you're testing.
There are many decorators, naming conventions, and code specifications required for Salt test files. We will not be covering all of the these specifics in this tutorial. Please refer to the testing documentation links listed below in the Additional Testing Documentation section to learn more about these requirements.
In the following sections, the test examples assume the "new" test is added to a test file that is already present and regularly running in the test suite and is written with the correct requirements.
Since integration tests validate against a running environment, as explained in the Running Integration Tests section of this tutorial, integration tests are very easy to write and are generally the preferred method of writing Salt tests.
The following integration test is an example taken from the
test.py file in the
tests/integration/modules directory. This test uses the
to test the functionality of a traditional execution module command.
run_function method uses the integration test daemons to execute a
module.function command as you would with Salt. The minion runs the function and
returns. The test also uses Python's Assert Functions to test that the
minion's return is expected.
def test_ping(self): ''' test.ping ''' self.assertTrue(self.run_function('test.ping'))
Args can be passed in to the
run_function method as well:
def test_echo(self): ''' test.echo ''' self.assertEqual(self.run_function('test.echo', ['text']), 'text')
The next example is taken from the
tests/integration/modules/test_aliases.py file and
demonstrates how to pass kwargs to the
run_function call. Also note that this
test uses another salt function to ensure the correct data is present (via the
aliases.set_target call) before attempting to assert what the
call should return.
def test_set_target(self): ''' aliases.set_target and aliases.get_target ''' set_ret = self.run_function( 'aliases.set_target', alias='fred', target='bob') self.assertTrue(set_ret) tgt_ret = self.run_function( 'aliases.get_target', alias='fred') self.assertEqual(tgt_ret, 'bob')
Using multiple Salt commands in this manner provides two useful benefits. The first is
that it provides some additional coverage for the
The second benefit is the call to
aliases.get_target is not dependent on the
presence of any aliases set outside of this test. Tests should not be dependent on
the previous execution, success, or failure of other tests. They should be isolated
from other tests as much as possible.
While it might be tempting to build out a test file where tests depend on one another before running, this should be avoided. SaltStack recommends that each test should test a single functionality and not rely on other tests. Therefore, when possible, individual tests should also be broken up into singular pieces. These are not hard-and-fast rules, but serve more as recommendations to keep the test suite simple. This helps with debugging code and related tests when failures occur and problems are exposed. There may be instances where large tests use many asserts to set up a use case that protects against potential regressions.
The examples above all use the
run_function option to test execution module
functions in a traditional master/minion environment. To see examples of how to
test other common Salt components such as runners, salt-api, and more, please
refer to the Integration Test Class Examples
Since Salt is used to change the settings and behavior of systems, often, the best approach to run tests is to make actual changes to an underlying system. This is where the concept of destructive integration tests comes into play. Tests can be written to alter the system they are running on. This capability is what fills in the gap needed to properly test aspects of system management like package installation.
To write a destructive test, import and use the
destructiveTest decorator for
the test method:
import integration from tests.support.helpers import destructiveTest class PkgTest(integration.ModuleCase): @destructiveTest def test_pkg_install(self): ret = self.run_function('pkg.install', name='finch') self.assertSaltTrueReturn(ret) ret = self.run_function('pkg.purge', name='finch') self.assertSaltTrueReturn(ret)
As explained in the Integration vs. Unit section above, unit tests should be
written to test the logic of a function. This includes focusing on testing
raises statements. Substantial effort should be made to mock
external resources that are used in the code being tested.
External resources that should be mocked include, but are not limited to, APIs, function calls, external data either globally available or passed in through function arguments, file data, etc. This practice helps to isolate unit tests to test Salt logic. One handy way to think about writing unit tests is to "block all of the exits". More information about how to properly mock external resources can be found in Salt's Unit Test documentation.
Salt's unit tests utilize Python's mock class as well as MagicMock. The
@patch decorator is also heavily used when "blocking all the exits".
A simple example of a unit test currently in use in Salt is the
test_get_file_not_found test in the
This test uses the
@patch decorator and
MagicMock to mock the return
of the call to Salt's
cp.hash_file execution module function. This ensures
that we're testing the
cp.get_file function directly, instead of inadvertently
testing the call to
cp.hash_file, which is used in
def test_get_file_not_found(self): ''' Test if get_file can't find the file. ''' with patch('salt.modules.cp.hash_file', MagicMock(return_value=False)): path = 'salt://saltines' dest = '/srv/salt/cheese' ret = '' self.assertEqual(cp.get_file(path, dest), ret)
Note that Salt's
cp module is imported at the top of the file, along with all
of the other necessary testing imports. The
get_file function is then called
directed in the testing function, instead of using the
run_function method as
the integration test examples do above.
The call to
cp.get_file returns an empty string when a
hash_file isn't found.
Therefore, the example above is a good illustration of a unit test "blocking
the exits" via the
@patch decorator, as well as testing logic via asserting
return statement in the
There are more examples of writing unit tests of varying complexities available in the following docs:
Considerable care should be made to ensure that you're testing something useful in your test functions. It is very easy to fall into a situation where you have mocked so much of the original function that the test results in only asserting against the data you have provided. This results in a poor and fragile unit test.
To test to see if a given log message has been emitted, the following pattern can be used
# Import logging handler from tests.support.helpers import TestsLoggingHandler # .. inside test with TestsLoggingHandler() as handler: for message in handler.messages: if message.startswith('ERROR: This is the error message we seek'): break else: raise AssertionError('Did not find error message')
SaltStack maintains a Jenkins server which can be viewed at https://jenkins.saltstack.com. The tests executed from this Jenkins server create fresh virtual machines for each test run, then execute the destructive tests on the new, clean virtual machine. This allows for the execution of tests across supported platforms.
In addition to this tutorial, there are some other helpful resources and documentation that go into more depth on Salt's test runner, writing tests for Salt code, and general Python testing documentation. Please see the follow references for more information: